[ GPS device ]

Aplicom A1 Max on TrackeraX

The Aplicom A1 Max is a GPS tracker that works with TrackeraX over the aplicom protocol on port 6049. From the platform it accepts custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6049 (aplicom protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Aplicom A1 Max model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the aplicom protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Axle weightaxleWeight
  • Battery voltagebattery
  • Driver ID (RFID / iButton)driverUniqueId
  • Engine temperatureengineTemp
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Fuel usedfuelUsed
  • Engine hourshours
  • Digital inputsinput
  • OBD odometerobdOdometer
  • OBD speedobdSpeed
  • Odometerodometer
  • Digital outputsoutput
  • External powerpower
  • RPMrpm
  • Visible satellitessatVisible
  • Service odometerserviceOdometer
  • Throttlethrottle
  • Trip odometertripOdometer
  • Firmware versionversionFw
  • VINvin

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)

[ Protocol-specific attributes ]

absStatusCounter · activeAlarm · airTempDep1 · airTempDep2 · alternatorStatus · ambientTemperature · atvbStatusCounter · axle · batteryVoltage · brakeFlags · brakeLining · brakeMinMaxData · brakePressure1 · brakePressure2 · brakeTemperature · card1 · card2 · coldUnitState · condenserPressure · currentGear · dataValidity · defrostTempDep1 · defrostTempDep2 · dieselHours · dieselTemperature · doorStatus · driver · driver1State · driver2State · driverActivity · driverTime · electricHours · engineTempMax · engineTempMin · eventData · eventInfo · exhaustFluid · extraInfo · fuelEconomy · grossWeight and 39 more

[ Other Aplicom models ]

Aplicom A1 Max FAQ

Which port does the Aplicom A1 Max use to connect to TrackeraX?

The Aplicom A1 Max uses the aplicom protocol and connects to port 6049 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Aplicom A1 Max send to the platform?

TrackeraX reads 22 parameters of the aplicom protocol on this device, for example: Axle weight, Battery voltage, Driver ID (RFID / iButton), Engine temperature, Fuel. Each one can become a sensor or an alert.

How do I add the Aplicom A1 Max to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6049 and create it in TrackeraX with its IMEI, choosing the Aplicom A1 Max model.

Try the A1 Max on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.