Arknav gx, rx on TrackeraX
The Arknav gx, rx is a GPS tracker that works with TrackeraX over the arknav protocol on port 6107. From the platform it accepts custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6107 (arknav protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Arknav gx, rx model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the arknav protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- HDOPhdop
[ Other Arknav models ]
Arknav gx, rx FAQ
Which port does the Arknav gx, rx use to connect to TrackeraX?
The Arknav gx, rx uses the arknav protocol and connects to port 6107 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Arknav gx, rx send to the platform?
TrackeraX reads 1 parameters of the arknav protocol on this device, for example: HDOP. Each one can become a sensor or an alert.
How do I add the Arknav gx, rx to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6107 and create it in TrackeraX with its IMEI, choosing the Arknav gx, rx model.
Try the Arknav gx, rx on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

