[ GPS device ]

Assistant Telematics AVT80 on TrackeraX

The Assistant Telematics AVT80 is a tracker for cars and motorcycles with 4G LTE, Bluetooth Low Energy and GPS/GLONASS. It comes with an internal battery and a 1-Wire interface. It is rated IP67 against dust and water. In TrackeraX it connects over the hyn600 protocol on port 6258 and accepts 1 command from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6258 (hyn600 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Assistant Telematics AVT80 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Hardware and connectivity ]

  • 1-Wire
  • Internal battery
  • Bluetooth
  • GLONASS
  • 4G LTE
  • IP67

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the hyn600 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Battery levelbatteryLevel
  • HDOPhdop
  • Ignitionignition
  • Digital inputsinput
  • Motionmotion
  • Odometerodometer
  • Digital outputsoutput
  • External powerpower
  • Trip odometertripOdometer

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)

[ Alarms the protocol can report ]

  • Accidentaccident
  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Harsh corneringhardCornering
  • Jammingjamming
  • Low batterylowBattery
  • Low powerlowPower
  • Overspeedoverspeed
  • Power cutpowerCut
  • Power restoredpowerRestored
  • Tamperingtampering
  • Towingtow

[ Other Assistant Telematics models ]

Assistant Telematics AVT80 FAQ

Which port does the Assistant Telematics AVT80 use to connect to TrackeraX?

The Assistant Telematics AVT80 uses the hyn600 protocol and connects to port 6258 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Assistant Telematics AVT80 send to the platform?

TrackeraX reads 11 parameters of the hyn600 protocol on this device, for example: Battery voltage, Battery level, HDOP, Ignition, Digital inputs. Each one can become a sensor or an alert.

Which alarms does the Assistant Telematics AVT80 report?

TrackeraX recognizes these hyn600 alarms: Accident, Geofence entry, Geofence exit, Harsh acceleration, Harsh braking. Any of them can become an email, push or webhook notification.

How do I add the Assistant Telematics AVT80 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6258 and create it in TrackeraX with its IMEI, choosing the Assistant Telematics AVT80 model.

Try the AVT80 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.