ATrack AX7P on TrackeraX
The ATrack AX7P is a vehicle tracker. In TrackeraX it connects over the atrack protocol on port 6044 and accepts 1 command from the platform.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6044 (atrack protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the ATrack AX7P model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the atrack protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Coolant temperaturecoolantTemp
- Driver ID (RFID / iButton)driverUniqueId
- Engine loadengineLoad
- Fuelfuel
- Fuel consumptionfuelConsumption
- Fuel usedfuelUsed
- HDOPhdop
- Engine hourshours
- SIM ICCIDiccid
- Ignitionignition
- Photoimage
- Digital inputsinput
- Motionmotion
- OBD speedobdSpeed
- Odometerodometer
- Digital outputsoutput
- External powerpower
- RPMrpm
- GSM signalrssi
- Satellitessat
- Service odometerserviceOdometer
- Throttlethrottle
- Firmware versionversionFw
- VINvin
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Counters (count1, count2…)
- Inputs (in1, in2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
[ Protocol-specific attributes ]
driver1 · driver2 · intakeTemp · message · model · tag
[ Other ATrack models ]
ATrack AX7P FAQ
Which port does the ATrack AX7P use to connect to TrackeraX?
The ATrack AX7P uses the atrack protocol and connects to port 6044 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the ATrack AX7P send to the platform?
TrackeraX reads 29 parameters of the atrack protocol on this device, for example: Battery voltage, Coolant temperature, Driver ID (RFID / iButton), Engine load, Fuel. Each one can become a sensor or an alert.
Which alarms does the ATrack AX7P report?
TrackeraX recognizes these atrack alarms: Harsh acceleration, Harsh braking, Harsh cornering. Any of them can become an email, push or webhook notification.
How do I add the ATrack AX7P to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6044 and create it in TrackeraX with its IMEI, choosing the ATrack AX7P model.
Try the ATrack AX7P on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

