[ GPS device ]

AURO Comfort 1060 on TrackeraX

The AURO Comfort 1060 is a GPS tracker that works with TrackeraX over the auro protocol on port 6096. From the platform it accepts custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6096 (auro protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the AURO Comfort 1060 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the auro protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Chargingcharge

AURO Comfort 1060 FAQ

Which port does the AURO Comfort 1060 use to connect to TrackeraX?

The AURO Comfort 1060 uses the auro protocol and connects to port 6096 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the AURO Comfort 1060 send to the platform?

TrackeraX reads 2 parameters of the auro protocol on this device, for example: Battery voltage, Charging. Each one can become a sensor or an alert.

How do I add the AURO Comfort 1060 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6096 and create it in TrackeraX with its IMEI, choosing the AURO Comfort 1060 model.

Try the AURO Comfort 1060 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.