AVLSAT NEO1 on TrackeraX
The AVLSAT NEO1 is a GPS tracker that works with TrackeraX over the neos protocol on port 6183. From the platform it accepts custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6183 (neos protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the AVLSAT NEO1 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the neos protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery levelbatteryLevel
- Digital inputsinput
- GSM signalrssi
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
[ Other AVLSAT models ]
AVLSAT NEO1 FAQ
Which port does the AVLSAT NEO1 use to connect to TrackeraX?
The AVLSAT NEO1 uses the neos protocol and connects to port 6183 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the AVLSAT NEO1 send to the platform?
TrackeraX reads 4 parameters of the neos protocol on this device, for example: Battery level, Digital inputs, GSM signal. Each one can become a sensor or an alert.
How do I add the AVLSAT NEO1 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6183 and create it in TrackeraX with its IMEI, choosing the AVLSAT NEO1 model.
Try the NEO1 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

