[ GPS device ]

Bofan PT100 on TrackeraX

The Bofan PT100 is a vehicle tracker. In TrackeraX it connects over the pt502 protocol on port 6017 and accepts 9 commands from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6017 (pt502 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Bofan PT100 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Open doordoorOpen
  • Close doordoorClose
  • Output controloutputControl
  • Overspeed alarmalarmSpeed
  • Set time zonesetTimezone
  • Request photorequestPhoto
  • Custom commandcustom

[ Data reported by the pt502 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Driver ID (RFID / iButton)driverUniqueId
  • Photoimage
  • Digital inputsinput
  • Odometerodometer
  • Digital outputsoutput
  • GSM signalrssi
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)

[ Alarms the protocol can report ]

  • Fatigue drivingfatigueDriving
  • Geofencegeofence
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Movementmovement
  • Power cutpowerCut
  • SOSsos
  • Towingtow
  • Vibrationvibration

[ Other Bofan models ]

[ Other devices on the pt502 protocol ]

Bofan PT100 FAQ

Which port does the Bofan PT100 use to connect to TrackeraX?

The Bofan PT100 uses the pt502 protocol and connects to port 6017 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Bofan PT100 send to the platform?

TrackeraX reads 9 parameters of the pt502 protocol on this device, for example: Battery voltage, Driver ID (RFID / iButton), Photo, Digital inputs, Odometer. Each one can become a sensor or an alert.

Can I send commands to the Bofan PT100 from TrackeraX?

Yes. From the map or the device page you can send 8 command types to the Bofan PT100, including: Engine stop, Engine resume, Open door, Close door, Output control.

Which alarms does the Bofan PT100 report?

TrackeraX recognizes these pt502 alarms: Fatigue driving, Geofence, Harsh acceleration, Harsh braking, Movement. Any of them can become an email, push or webhook notification.

How do I add the Bofan PT100 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6017 and create it in TrackeraX with its IMEI, choosing the Bofan PT100 model.

Try the Bofan PT100 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.