BWS NB2 on TrackeraX
The BWS NB2 is a GPS tracker that works with TrackeraX over the bws protocol on port 6260. From the platform it supports engine stop and engine resume, plus custom commands. The server decodes 6 alarm types from this protocol, such as harsh acceleration, harsh braking and harsh cornering.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6260 (bws protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the BWS NB2 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Custom commandcustom
[ Data reported by the bws protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Device temperaturedeviceTemp
- Engine hourshours
- Odometerodometer
- External powerpower
- GSM signalrssi
- Satellitessat
Numbered inputs and sensors
- IO elements (io1, io2…)
[ Alarms the protocol can report ]
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- Idlingidle
- Movementmovement
- Removalremoving
BWS NB2 FAQ
Which port does the BWS NB2 use to connect to TrackeraX?
The BWS NB2 uses the bws protocol and connects to port 6260 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the BWS NB2 send to the platform?
TrackeraX reads 8 parameters of the bws protocol on this device, for example: Battery voltage, Device temperature, Engine hours, Odometer, External power. Each one can become a sensor or an alert.
Can I send commands to the BWS NB2 from TrackeraX?
Yes. From the map or the device page you can send 2 command types to the BWS NB2, including: Engine stop, Engine resume.
Which alarms does the BWS NB2 report?
TrackeraX recognizes these bws alarms: Harsh acceleration, Harsh braking, Harsh cornering, Idling, Movement. Any of them can become an email, push or webhook notification.
How do I add the BWS NB2 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6260 and create it in TrackeraX with its IMEI, choosing the BWS NB2 model.
Try the BWS NB2 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

