C2STEK TR-11 on TrackeraX
The C2STEK TR-11 is a GPS tracker. In TrackeraX it connects over the c2stek protocol on port 6181 and accepts 1 command from the platform.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6181 (c2stek protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the C2STEK TR-11 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the c2stek protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armedarmed
- Battery voltagebattery
- Doordoor
- Ignitionignition
[ Alarms the protocol can report ]
- Doordoor
- Faultfault
- Low batterylowBattery
- Overspeedoverspeed
- Power cutpowerCut
- SOSsos
- Vibrationvibration
[ Other C2STEK models ]
C2STEK TR-11 FAQ
Which port does the C2STEK TR-11 use to connect to TrackeraX?
The C2STEK TR-11 uses the c2stek protocol and connects to port 6181 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the C2STEK TR-11 send to the platform?
TrackeraX reads 4 parameters of the c2stek protocol on this device, for example: Armed, Battery voltage, Door, Ignition. Each one can become a sensor or an alert.
Which alarms does the C2STEK TR-11 report?
TrackeraX recognizes these c2stek alarms: Door, Fault, Low battery, Overspeed, Power cut. Any of them can become an email, push or webhook notification.
How do I add the C2STEK TR-11 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6181 and create it in TrackeraX with its IMEI, choosing the C2STEK TR-11 model.
Try the TR-11 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

