[ GPS device ]

CalAmp ATU-620 on TrackeraX

The CalAmp ATU-620 is an asset tracker. It has an internal battery. It is rated IP66 against dust and water. In TrackeraX it connects over the calamp protocol on port 6082 and accepts 1 command from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6082 (calamp protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the CalAmp ATU-620 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Hardware and connectivity ]

  • Internal battery
  • IP66

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the calamp protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Driver ID (RFID / iButton)driverUniqueId
  • HDOPhdop
  • Ignitionignition
  • Digital inputsinput
  • GSM signalrssi
  • Satellitessat

[ Protocol-specific attributes ]

acc · append · carrier · modem

[ Other CalAmp models ]

CalAmp ATU-620 FAQ

Which port does the CalAmp ATU-620 use to connect to TrackeraX?

The CalAmp ATU-620 uses the calamp protocol and connects to port 6082 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the CalAmp ATU-620 send to the platform?

TrackeraX reads 6 parameters of the calamp protocol on this device, for example: Driver ID (RFID / iButton), HDOP, Ignition, Digital inputs, GSM signal. Each one can become a sensor or an alert.

How do I add the CalAmp ATU-620 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6082 and create it in TrackeraX with its IMEI, choosing the CalAmp ATU-620 model.

Try the ATU-620 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.