[ GPS device ]

Carcell CR on TrackeraX

The Carcell CR is a GPS tracker that works with TrackeraX over the carcell protocol on port 6114. From the platform it supports engine stop and engine resume, plus custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6114 (carcell protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Carcell CR model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Custom commandcustom

[ Data reported by the carcell protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Accelerationacceleration
  • Battery voltagebattery
  • GPS statusgps
  • SIM ICCIDiccid
  • Ignitionignition
  • Digital inputsinput
  • External powerpower
  • GSM signalrssi

[ Protocol-specific attributes ]

clockType · cloned · jamming · painel · timeUntilDelivery · x · y · z

Carcell CR FAQ

Which port does the Carcell CR use to connect to TrackeraX?

The Carcell CR uses the carcell protocol and connects to port 6114 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Carcell CR send to the platform?

TrackeraX reads 8 parameters of the carcell protocol on this device, for example: Acceleration, Battery voltage, GPS status, SIM ICCID, Ignition. Each one can become a sensor or an alert.

Can I send commands to the Carcell CR from TrackeraX?

Yes. From the map or the device page you can send 2 command types to the Carcell CR, including: Engine stop, Engine resume.

How do I add the Carcell CR to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6114 and create it in TrackeraX with its IMEI, choosing the Carcell CR model.

Try the Carcell CR on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.