[ GPS device ]

CAREU EZ2 on TrackeraX

The CAREU EZ2 is a GPS tracker that works with TrackeraX over the intellitrac protocol on port 6037. From the platform it accepts custom commands. The server decodes 8 alarm types from this protocol, such as fall, geofence entry and geofence exit.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6037 (intellitrac protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the CAREU EZ2 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the intellitrac protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Axle weightaxleWeight
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Digital inputsinput
  • OBD odometerobdOdometer
  • OBD speedobdSpeed
  • Digital outputsoutput
  • RPMrpm
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • FallfallDown
  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Jammingjamming
  • Low powerlowPower
  • Power offpowerOff
  • Power restoredpowerRestored
  • SOSsos

[ Protocol-specific attributes ]

chargerPressure · coolant · tpl

[ Other CAREU models ]

[ Other devices on the intellitrac protocol ]

CAREU EZ2 FAQ

Which port does the CAREU EZ2 use to connect to TrackeraX?

The CAREU EZ2 uses the intellitrac protocol and connects to port 6037 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the CAREU EZ2 send to the platform?

TrackeraX reads 11 parameters of the intellitrac protocol on this device, for example: Axle weight, Fuel, Fuel consumption, Digital inputs, OBD odometer. Each one can become a sensor or an alert.

Which alarms does the CAREU EZ2 report?

TrackeraX recognizes these intellitrac alarms: Fall, Geofence entry, Geofence exit, Jamming, Low power. Any of them can become an email, push or webhook notification.

How do I add the CAREU EZ2 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6037 and create it in TrackeraX with its IMEI, choosing the CAREU EZ2 model.

Try the EZ2 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.