Carscop CCTR-828-4G on TrackeraX
The Carscop CCTR-828-4G is a GPS tracker that works with TrackeraX over the carscop protocol on port 6040. From the platform it accepts custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6040 (carscop protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Carscop CCTR-828-4G model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the carscop protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Odometerodometer
[ Other Carscop models ]
Carscop CCTR-828-4G FAQ
Which port does the Carscop CCTR-828-4G use to connect to TrackeraX?
The Carscop CCTR-828-4G uses the carscop protocol and connects to port 6040 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Carscop CCTR-828-4G send to the platform?
TrackeraX reads 1 parameters of the carscop protocol on this device, for example: Odometer. Each one can become a sensor or an alert.
How do I add the Carscop CCTR-828-4G to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6040 and create it in TrackeraX with its IMEI, choosing the Carscop CCTR-828-4G model.
Try the CCTR-828-4G on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

