Castel IDD-213G on TrackeraX
The Castel IDD-213G is a GPS tracker that works with TrackeraX over the castel protocol on port 6086. From the platform it supports engine stop and engine resume, plus custom commands. The server decodes 16 alarm types from this protocol, such as accident, fatigue driving and harsh acceleration.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6086 (castel protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Castel IDD-213G model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Custom commandcustom
[ Data reported by the castel protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Device temperaturedeviceTemp
- Fault codes (DTC)dtcs
- Fuel consumptionfuelConsumption
- G-sensorgSensor
- Ignitionignition
- Odometerodometer
- External powerpower
- Satellitessat
- Trip odometertripOdometer
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- Fatigue drivingfatigueDriving
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- High RPMhighRpm
- Idlingidle
- Lane changelaneChange
- Low powerlowPower
- Overspeedoverspeed
- Power offpowerOff
- Power onpowerOn
- Tamperingtampering
- Temperaturetemperature
- Towingtow
- Vibrationvibration
[ Protocol-specific attributes ]
fault · pid
[ Other Castel models ]
[ Other devices on the castel protocol ]
Castel IDD-213G FAQ
Which port does the Castel IDD-213G use to connect to TrackeraX?
The Castel IDD-213G uses the castel protocol and connects to port 6086 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Castel IDD-213G send to the platform?
TrackeraX reads 12 parameters of the castel protocol on this device, for example: Battery voltage, Device temperature, Fault codes (DTC), Fuel consumption, G-sensor. Each one can become a sensor or an alert.
Can I send commands to the Castel IDD-213G from TrackeraX?
Yes. From the map or the device page you can send 2 command types to the Castel IDD-213G, including: Engine stop, Engine resume.
Which alarms does the Castel IDD-213G report?
TrackeraX recognizes these castel alarms: Accident, Fatigue driving, Harsh acceleration, Harsh braking, Harsh cornering. Any of them can become an email, push or webhook notification.
How do I add the Castel IDD-213G to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6086 and create it in TrackeraX with its IMEI, choosing the Castel IDD-213G model.
Try the IDD-213G on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

