[ GPS device ]

Cguard Zenit on TrackeraX

The Cguard Zenit is a GPS tracker. In TrackeraX it connects over the cguard protocol on port 6123 and accepts 1 command from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6123 (cguard protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Cguard Zenit model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the cguard protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Battery levelbatteryLevel
  • External powerpower
  • GSM signalrssi
  • Satellitessat

[ Other Cguard models ]

Cguard Zenit FAQ

Which port does the Cguard Zenit use to connect to TrackeraX?

The Cguard Zenit uses the cguard protocol and connects to port 6123 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Cguard Zenit send to the platform?

TrackeraX reads 5 parameters of the cguard protocol on this device, for example: Battery voltage, Battery level, External power, GSM signal, Satellites. Each one can become a sensor or an alert.

How do I add the Cguard Zenit to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6123 and create it in TrackeraX with its IMEI, choosing the Cguard Zenit model.

Try the Zenit on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.