Coban GPS301 on TrackeraX
The Coban GPS301 is a GPS tracker that works with TrackeraX over the gps103 protocol on port 6001. From the platform it supports engine stop, engine resume and arm alarm, plus custom commands. The server decodes 16 alarm types from this protocol, such as accident, bonnet open and door.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6001 (gps103 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Coban GPS301 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Arm alarmalarmArm
- Disarm alarmalarmDisarm
- Request positionpositionSingle
- Reporting intervalpositionPeriodic
- Stop reportingpositionStop
- Request photorequestPhoto
- Engine stop (custom)customEngineStop
- Engine resume (custom)customEngineResume
- Custom commandcustom
[ Data reported by the gps103 protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Chargingcharge
- Coolant temperaturecoolantTemp
- Doordoor
- Driver ID (RFID / iButton)driverUniqueId
- Fault codes (DTC)dtcs
- Engine loadengineLoad
- Fuelfuel
- Fuel consumptionfuelConsumption
- HDOPhdop
- Engine hourshours
- Ignitionignition
- Photoimage
- OBD speedobdSpeed
- Odometerodometer
- RPMrpm
- GSM signalrssi
- Satellitessat
- Throttlethrottle
Numbered inputs and sensors
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- Bonnet openbonnet
- Doordoor
- Faultfault
- Foot brakefootBrake
- Fuel leakfuelLeak
- Geofencegeofence
- Low batterylowBattery
- Movementmovement
- Overspeedoverspeed
- Power cutpowerCut
- Power offpowerOff
- Power onpowerOn
- SOSsos
- Temperaturetemperature
- Vibrationvibration
[ Protocol-specific attributes ]
error · fuel1 · fuel2 · sensorId · sensorVoltage
[ Other Coban models ]
[ Other devices on the gps103 protocol ]
Coban GPS301 FAQ
Which port does the Coban GPS301 use to connect to TrackeraX?
The Coban GPS301 uses the gps103 protocol and connects to port 6001 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Coban GPS301 send to the platform?
TrackeraX reads 20 parameters of the gps103 protocol on this device, for example: Battery voltage, Charging, Coolant temperature, Door, Driver ID (RFID / iButton). Each one can become a sensor or an alert.
Can I send commands to the Coban GPS301 from TrackeraX?
Yes. From the map or the device page you can send 10 command types to the Coban GPS301, including: Engine stop, Engine resume, Arm alarm, Disarm alarm, Request position.
Which alarms does the Coban GPS301 report?
TrackeraX recognizes these gps103 alarms: Accident, Bonnet open, Door, Fault, Foot brake. Any of them can become an email, push or webhook notification.
How do I add the Coban GPS301 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6001 and create it in TrackeraX with its IMEI, choosing the Coban GPS301 model.
Try the Coban GPS301 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

