CradlePoint IBR950 on TrackeraX
The CradlePoint IBR950 is a GPS tracker that works with TrackeraX over the taip protocol on port 6031. From the platform it accepts custom commands. The server decodes 12 alarm types from this protocol, such as accident, harsh acceleration and harsh braking.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6031 (taip protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the CradlePoint IBR950 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the taip protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Chargingcharge
- Coolant temperaturecoolantTemp
- Driver ID (RFID / iButton)driverUniqueId
- Fuel levelfuelLevel
- Fuel usedfuelUsed
- HDOPhdop
- Engine hourshours
- SIM ICCIDiccid
- Ignitionignition
- Digital inputsinput
- OBD speedobdSpeed
- Odometerodometer
- Digital outputsoutput
- PDOPpdop
- External powerpower
- RPMrpm
- GSM signalrssi
- Satellitessat
- Throttlethrottle
- Firmware versionversionFw
- Hardware versionversionHw
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- IO elements (io1, io2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- High RPMhighRpm
- Idlingidle
- Low batterylowBattery
- Overspeedoverspeed
- Power cutpowerCut
- Power restoredpowerRestored
- SOSsos
- Temperaturetemperature
[ Protocol-specific attributes ]
clutchState · cruiseControl · engineBrake · engineTorque · oilPressure · parkingBrake · serial · serviceBrake · tripDistance · tripTime
[ Other Cradlepoint models ]
[ Other devices on the taip protocol ]
CradlePoint IBR950 FAQ
Which port does the CradlePoint IBR950 use to connect to TrackeraX?
The CradlePoint IBR950 uses the taip protocol and connects to port 6031 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the CradlePoint IBR950 send to the platform?
TrackeraX reads 25 parameters of the taip protocol on this device, for example: Battery voltage, Charging, Coolant temperature, Driver ID (RFID / iButton), Fuel level. Each one can become a sensor or an alert.
Which alarms does the CradlePoint IBR950 report?
TrackeraX recognizes these taip alarms: Accident, Harsh acceleration, Harsh braking, Harsh cornering, High RPM. Any of them can become an email, push or webhook notification.
How do I add the CradlePoint IBR950 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6031 and create it in TrackeraX with its IMEI, choosing the CradlePoint IBR950 model.
Try the CradlePoint IBR950 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

