[ GPS device ]

DSF22 protocol devices on TrackeraX

The DSF22 protocol devices is a GPS tracker that works with TrackeraX over the dsf22 protocol on port 6236. From the platform it accepts custom commands. The server decodes 1 alarm type from this protocol, such as jamming.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6236 (dsf22 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the DSF22 protocol devices model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the dsf22 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Fuelfuel
  • Ignitionignition

Numbered inputs and sensors

  • Inputs (in1, in2…)
  • Outputs (out1, out2…)

[ Alarms the protocol can report ]

  • Jammingjamming

[ Other devices on the dsf22 protocol ]

DSF22 protocol devices FAQ

Which port does the DSF22 protocol devices use to connect to TrackeraX?

The DSF22 protocol devices uses the dsf22 protocol and connects to port 6236 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the DSF22 protocol devices send to the platform?

TrackeraX reads 4 parameters of the dsf22 protocol on this device, for example: Fuel, Ignition. Each one can become a sensor or an alert.

Which alarms does the DSF22 protocol devices report?

TrackeraX recognizes these dsf22 alarms: Jamming. Any of them can become an email, push or webhook notification.

How do I add the DSF22 protocol devices to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6236 and create it in TrackeraX with its IMEI, choosing the DSF22 protocol devices model.

Try the DSF22 protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.