Eelink GPT18 on TrackeraX
The Eelink GPT18 is a personal tracker. It comes with an internal battery. It is rated IP65 against dust and water. In TrackeraX it connects over the eelink protocol on port 6064 and accepts 5 commands from the platform.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6064 (eelink protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Eelink GPT18 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Hardware and connectivity ]
- Internal battery
- IP65
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Request positionpositionSingle
- Engine stopengineStop
- Engine resumeengineResume
- Reboot devicerebootDevice
- Custom commandcustom
[ Data reported by the eelink protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armedarmed
- Battery voltagebattery
- Blockedblocked
- Chargingcharge
- Fuelfuel
- Fuel consumptionfuelConsumption
- GPS statusgps
- Humidityhumidity
- Ignitionignition
- Motionmotion
- Odometerodometer
- GSM signalrssi
- Satellitessat
- Stepssteps
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- FallfallDown
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- GPS antenna cutgpsAntennaCut
- Low batterylowBattery
- Low speedlowspeed
- Overspeedoverspeed
- Power offpowerOff
- Removalremoving
- SOSsos
- Vibrationvibration
[ Protocol-specific attributes ]
co2 · illuminance · tag
[ Other Eelink models ]
[ Other devices on the eelink protocol ]
Eelink GPT18 FAQ
Which port does the Eelink GPT18 use to connect to TrackeraX?
The Eelink GPT18 uses the eelink protocol and connects to port 6064 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Eelink GPT18 send to the platform?
TrackeraX reads 16 parameters of the eelink protocol on this device, for example: Armed, Battery voltage, Blocked, Charging, Fuel. Each one can become a sensor or an alert.
Can I send commands to the Eelink GPT18 from TrackeraX?
Yes. From the map or the device page you can send 4 command types to the Eelink GPT18, including: Request position, Engine stop, Engine resume, Reboot device.
Which alarms does the Eelink GPT18 report?
TrackeraX recognizes these eelink alarms: Accident, Fall, Geofence entry, Geofence exit, GPS antenna cut. Any of them can become an email, push or webhook notification.
How do I add the Eelink GPT18 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6064 and create it in TrackeraX with its IMEI, choosing the Eelink GPT18 model.
Try the GPT18 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

