Eelink TK119-3G on TrackeraX
The Eelink TK119-3G is a vehicle tracker. In TrackeraX it connects over the eelink protocol on port 6064 and accepts 5 commands from the platform.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6064 (eelink protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Eelink TK119-3G model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Request positionpositionSingle
- Engine stopengineStop
- Engine resumeengineResume
- Reboot devicerebootDevice
- Custom commandcustom
[ Data reported by the eelink protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armedarmed
- Battery voltagebattery
- Blockedblocked
- Chargingcharge
- Fuelfuel
- Fuel consumptionfuelConsumption
- GPS statusgps
- Humidityhumidity
- Ignitionignition
- Motionmotion
- Odometerodometer
- GSM signalrssi
- Satellitessat
- Stepssteps
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- FallfallDown
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- GPS antenna cutgpsAntennaCut
- Low batterylowBattery
- Low speedlowspeed
- Overspeedoverspeed
- Power offpowerOff
- Removalremoving
- SOSsos
- Vibrationvibration
[ Protocol-specific attributes ]
co2 · illuminance · tag
[ Other Eelink models ]
[ Other devices on the eelink protocol ]
Eelink TK119-3G FAQ
Which port does the Eelink TK119-3G use to connect to TrackeraX?
The Eelink TK119-3G uses the eelink protocol and connects to port 6064 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Eelink TK119-3G send to the platform?
TrackeraX reads 16 parameters of the eelink protocol on this device, for example: Armed, Battery voltage, Blocked, Charging, Fuel. Each one can become a sensor or an alert.
Can I send commands to the Eelink TK119-3G from TrackeraX?
Yes. From the map or the device page you can send 4 command types to the Eelink TK119-3G, including: Request position, Engine stop, Engine resume, Reboot device.
Which alarms does the Eelink TK119-3G report?
TrackeraX recognizes these eelink alarms: Accident, Fall, Geofence entry, Geofence exit, GPS antenna cut. Any of them can become an email, push or webhook notification.
How do I add the Eelink TK119-3G to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6064 and create it in TrackeraX with its IMEI, choosing the Eelink TK119-3G model.
Try the TK119-3G on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

