Fifotrack R18 on TrackeraX
The Fifotrack R18 is a GPS tracker that works with TrackeraX over the fifotrack protocol on port 6124. From the platform it supports request photo, plus custom commands. The server decodes 19 alarm types from this protocol, such as fall, fatigue driving and geofence entry.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6124 (fifotrack protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Fifotrack R18 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
- Request photorequestPhoto
[ Data reported by the fifotrack protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Battery levelbatteryLevel
- Cardcard
- Driver ID (RFID / iButton)driverUniqueId
- Engine hourshours
- Photoimage
- Digital inputsinput
- Odometerodometer
- Digital outputsoutput
- GSM signalrssi
- Satellitessat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- IO elements (io1, io2…)
[ Alarms the protocol can report ]
- FallfallDown
- Fatigue drivingfatigueDriving
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- GPS antenna cutgpsAntennaCut
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Idlingidle
- Jammingjamming
- Low batterylowBattery
- Low powerlowPower
- Overspeedoverspeed
- Power cutpowerCut
- Power offpowerOff
- Power onpowerOn
- Power restoredpowerRestored
- SOSsos
- Temperaturetemperature
- Vibrationvibration
[ Other Fifotrack models ]
Fifotrack R18 FAQ
Which port does the Fifotrack R18 use to connect to TrackeraX?
The Fifotrack R18 uses the fifotrack protocol and connects to port 6124 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Fifotrack R18 send to the platform?
TrackeraX reads 14 parameters of the fifotrack protocol on this device, for example: Battery voltage, Battery level, Card, Driver ID (RFID / iButton), Engine hours. Each one can become a sensor or an alert.
Can I send commands to the Fifotrack R18 from TrackeraX?
Yes. From the map or the device page you can send 1 command types to the Fifotrack R18, including: Request photo.
Which alarms does the Fifotrack R18 report?
TrackeraX recognizes these fifotrack alarms: Fall, Fatigue driving, Geofence entry, Geofence exit, GPS antenna cut. Any of them can become an email, push or webhook notification.
How do I add the Fifotrack R18 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6124 and create it in TrackeraX with its IMEI, choosing the Fifotrack R18 model.
Try the R18 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

