[ GPS device ]

FleetGuide 4 on TrackeraX

The FleetGuide 4 is a GPS tracker that works with TrackeraX over the fleetguide protocol on port 6254. From the platform it accepts custom commands. The server decodes 2 alarm types from this protocol, such as low battery and low power.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6254 (fleetguide protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the FleetGuide 4 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the fleetguide protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Ignitionignition
  • Digital inputsinput
  • Motionmotion
  • Digital outputsoutput
  • External powerpower
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Low batterylowBattery
  • Low powerlowPower

[ Protocol-specific attributes ]

fuelTemp · sensor

[ Other FleetGuide models ]

FleetGuide 4 FAQ

Which port does the FleetGuide 4 use to connect to TrackeraX?

The FleetGuide 4 uses the fleetguide protocol and connects to port 6254 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the FleetGuide 4 send to the platform?

TrackeraX reads 9 parameters of the fleetguide protocol on this device, for example: Battery voltage, Ignition, Digital inputs, Motion, Digital outputs. Each one can become a sensor or an alert.

Which alarms does the FleetGuide 4 report?

TrackeraX recognizes these fleetguide alarms: Low battery, Low power. Any of them can become an email, push or webhook notification.

How do I add the FleetGuide 4 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6254 and create it in TrackeraX with its IMEI, choosing the FleetGuide 4 model.

Try the 4 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.