[ GPS device ]

Flespi gateway integration on TrackeraX

The Flespi gateway integration is a GPS tracker that works with TrackeraX over the flespi protocol on port 6149. From the platform it accepts custom commands. The server decodes 11 alarm types from this protocol, such as bonnet open, geofence entry and geofence exit.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6149 (flespi protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Flespi gateway integration model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the flespi protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Battery levelbatteryLevel
  • Chargingcharge
  • Device temperaturedeviceTemp
  • Driver ID (RFID / iButton)driverUniqueId
  • Fuelfuel
  • HDOPhdop
  • Ignitionignition
  • Digital inputsinput
  • Motionmotion
  • Odometerodometer
  • Digital outputsoutput
  • PDOPpdop
  • External powerpower
  • RPMrpm
  • Satellitessat
  • VINvin

Numbered inputs and sensors

  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Bonnet openbonnet
  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • GPS antenna cutgpsAntennaCut
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Harsh corneringhardCornering
  • Jammingjamming
  • Overspeedoverspeed
  • Towingtow
  • Vibrationvibration

[ Protocol-specific attributes ]

maxAcceleration · maxBraking · maxCornering

[ Other Flespi models ]

Flespi gateway integration FAQ

Which port does the Flespi gateway integration use to connect to TrackeraX?

The Flespi gateway integration uses the flespi protocol and connects to port 6149 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Flespi gateway integration send to the platform?

TrackeraX reads 18 parameters of the flespi protocol on this device, for example: Battery voltage, Battery level, Charging, Device temperature, Driver ID (RFID / iButton). Each one can become a sensor or an alert.

Which alarms does the Flespi gateway integration report?

TrackeraX recognizes these flespi alarms: Bonnet open, Geofence entry, Geofence exit, GPS antenna cut, Harsh acceleration. Any of them can become an email, push or webhook notification.

How do I add the Flespi gateway integration to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6149 and create it in TrackeraX with its IMEI, choosing the Flespi gateway integration model.

Try the Flespi gateway integration on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.