FMS500 Tacho on TrackeraX
The FMS500 Tacho is a GPS tracker that works with TrackeraX over the iotm protocol on port 6218. From the platform it supports output control, plus custom commands. The server decodes 1 alarm type from this protocol, such as jamming.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6218 (iotm protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the FMS500 Tacho model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Output controloutputControl
- Custom commandcustom
[ Data reported by the iotm protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Accelerationacceleration
- Axle weightaxleWeight
- Battery voltagebattery
- Battery levelbatteryLevel
- Coolant temperaturecoolantTemp
- Device temperaturedeviceTemp
- Driver ID (RFID / iButton)driverUniqueId
- Engine loadengineLoad
- Fuelfuel
- Fuel consumptionfuelConsumption
- Fuel usedfuelUsed
- HDOPhdop
- Engine hourshours
- Ignitionignition
- Motionmotion
- OBD odometerobdOdometer
- OBD speedobdSpeed
- Odometerodometer
- External powerpower
- RPMrpm
- Satellitessat
- Throttlethrottle
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- IO elements (io1, io2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Jammingjamming
[ Protocol-specific attributes ]
absWarning · airBagWarning · axesX · axesY · axesZ · batteryVoltageWarning · brakeSystemWarning · buttonPresent · cargoWeight · checkEngineWarning · coolantFluidWarning · doorFL · doorFR · doorRL · doorRR · driverSeatBeltWarning · footBrake · handBrake · lowFuelLevelWarning · oilPressure · oilPressureWarning · ptoState · rotateDirection · tirePressureWarning · topSpeed · trailerId · transmissionOilLife · wheelSpeed · wiegand26
[ Other Fms500 models ]
[ Other devices on the iotm protocol ]
FMS500 Tacho FAQ
Which port does the FMS500 Tacho use to connect to TrackeraX?
The FMS500 Tacho uses the iotm protocol and connects to port 6218 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the FMS500 Tacho send to the platform?
TrackeraX reads 27 parameters of the iotm protocol on this device, for example: Acceleration, Axle weight, Battery voltage, Battery level, Coolant temperature. Each one can become a sensor or an alert.
Can I send commands to the FMS500 Tacho from TrackeraX?
Yes. From the map or the device page you can send 1 command types to the FMS500 Tacho, including: Output control.
Which alarms does the FMS500 Tacho report?
TrackeraX recognizes these iotm alarms: Jamming. Any of them can become an email, push or webhook notification.
How do I add the FMS500 Tacho to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6218 and create it in TrackeraX with its IMEI, choosing the FMS500 Tacho model.
Try the FMS500 Tacho on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

