[ GPS device ]

Globalstar SmartOne Solar on TrackeraX

The Globalstar SmartOne Solar is a satellite tracker that works with TrackeraX over the globalstar protocol on port 6185. From the platform it accepts custom commands. The server decodes 2 alarm types from this protocol, such as low battery and vibration.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6185 (globalstar protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Globalstar SmartOne Solar model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the globalstar protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Chargingcharge
  • Digital inputsinput
  • Motionmotion

Numbered inputs and sensors

  • Inputs (in1, in2…)

[ Alarms the protocol can report ]

  • Low batterylowBattery
  • Vibrationvibration

[ Protocol-specific attributes ]

batteryReplace

[ Other Globalstar models ]

Globalstar SmartOne Solar FAQ

Which port does the Globalstar SmartOne Solar use to connect to TrackeraX?

The Globalstar SmartOne Solar uses the globalstar protocol and connects to port 6185 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Globalstar SmartOne Solar send to the platform?

TrackeraX reads 4 parameters of the globalstar protocol on this device, for example: Charging, Digital inputs, Motion. Each one can become a sensor or an alert.

Which alarms does the Globalstar SmartOne Solar report?

TrackeraX recognizes these globalstar alarms: Low battery, Vibration. Any of them can become an email, push or webhook notification.

How do I add the Globalstar SmartOne Solar to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6185 and create it in TrackeraX with its IMEI, choosing the Globalstar SmartOne Solar model.

Try the SmartOne Solar on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.