[ GPS device ]

Granit Navigator on TrackeraX

The Granit Navigator is a GPS tracker that works with TrackeraX over the granit protocol on port 6113. From the platform it supports request position, reporting interval and reboot device, plus custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6113 (granit protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Granit Navigator model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Request positionpositionSingle
  • Reporting intervalpositionPeriodic
  • Reboot devicerebootDevice
  • Device identificationdeviceIdentification
  • Custom commandcustom

[ Data reported by the granit protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Distancedistance
  • PDOPpdop
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • IO elements (io1, io2…)

Granit Navigator FAQ

Which port does the Granit Navigator use to connect to TrackeraX?

The Granit Navigator uses the granit protocol and connects to port 6113 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Granit Navigator send to the platform?

TrackeraX reads 5 parameters of the granit protocol on this device, for example: Distance, PDOP, Satellites. Each one can become a sensor or an alert.

Can I send commands to the Granit Navigator from TrackeraX?

Yes. From the map or the device page you can send 4 command types to the Granit Navigator, including: Request position, Reporting interval, Reboot device, Device identification.

How do I add the Granit Navigator to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6113 and create it in TrackeraX with its IMEI, choosing the Granit Navigator model.

Try the Granit Navigator on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.