Huasheng HS-4000W on TrackeraX
The Huasheng HS-4000W is a GPS tracker that works with TrackeraX over the huasheng protocol on port 6111. From the platform it supports arm alarm, disarm alarm and output control, plus custom commands. The server decodes 7 alarm types from this protocol, such as accident, fatigue driving and harsh acceleration.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6111 (huasheng protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Huasheng HS-4000W model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Arm alarmalarmArm
- Disarm alarmalarmDisarm
- Output controloutputControl
- Reporting intervalpositionPeriodic
- Speed limitsetSpeedLimit
- Custom commandcustom
[ Data reported by the huasheng protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Coolant temperaturecoolantTemp
- Fault codes (DTC)dtcs
- Engine loadengineLoad
- Fuelfuel
- Fuel consumptionfuelConsumption
- HDOPhdop
- Engine hourshours
- Ignitionignition
- Odometerodometer
- External powerpower
- RPMrpm
- GSM signalrssi
- Throttlethrottle
- Trip odometertripOdometer
- VINvin
[ Alarms the protocol can report ]
- Accidentaccident
- Fatigue drivingfatigueDriving
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- Removalremoving
- SOSsos
[ Protocol-specific attributes ]
adBlueLevel · airFlow · airTemp · averageSpeed · fuelLevel2 · timingAdvance
[ Other Huasheng models ]
Huasheng HS-4000W FAQ
Which port does the Huasheng HS-4000W use to connect to TrackeraX?
The Huasheng HS-4000W uses the huasheng protocol and connects to port 6111 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Huasheng HS-4000W send to the platform?
TrackeraX reads 15 parameters of the huasheng protocol on this device, for example: Coolant temperature, Fault codes (DTC), Engine load, Fuel, Fuel consumption. Each one can become a sensor or an alert.
Can I send commands to the Huasheng HS-4000W from TrackeraX?
Yes. From the map or the device page you can send 5 command types to the Huasheng HS-4000W, including: Arm alarm, Disarm alarm, Output control, Reporting interval, Speed limit.
Which alarms does the Huasheng HS-4000W report?
TrackeraX recognizes these huasheng alarms: Accident, Fatigue driving, Harsh acceleration, Harsh braking, Harsh cornering. Any of them can become an email, push or webhook notification.
How do I add the Huasheng HS-4000W to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6111 and create it in TrackeraX with its IMEI, choosing the Huasheng HS-4000W model.
Try the HS-4000W on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

