[ GPS device ]

iCar protocol devices on TrackeraX

The iCar protocol devices is a GPS tracker that works with TrackeraX over the icar protocol on port 7013. From the platform it accepts custom commands. The server decodes 4 alarm types from this protocol, such as overspeed, power cut and sos.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 7013 (icar protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the iCar protocol devices model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the icar protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Battery levelbatteryLevel
  • Blockedblocked
  • Doordoor
  • Fuelfuel
  • SIM ICCIDiccid
  • Ignitionignition
  • Odometerodometer
  • GSM signalrssi
  • Satellitessat
  • Stepssteps

Numbered inputs and sensors

  • IO elements (io1, io2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Overspeedoverspeed
  • Power cutpowerCut
  • SOSsos
  • Vibrationvibration

[ Protocol-specific attributes ]

engine · immobilizer · sentry · sleep · turnovers · wake

[ Other Icar models ]

iCar protocol devices FAQ

Which port does the iCar protocol devices use to connect to TrackeraX?

The iCar protocol devices uses the icar protocol and connects to port 7013 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the iCar protocol devices send to the platform?

TrackeraX reads 13 parameters of the icar protocol on this device, for example: Battery voltage, Battery level, Blocked, Door, Fuel. Each one can become a sensor or an alert.

Which alarms does the iCar protocol devices report?

TrackeraX recognizes these icar alarms: Overspeed, Power cut, SOS, Vibration. Any of them can become an email, push or webhook notification.

How do I add the iCar protocol devices to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 7013 and create it in TrackeraX with its IMEI, choosing the iCar protocol devices model.

Try the iCar protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.