[ GPS device ]

Istartek VT120-L on TrackeraX

The Istartek VT120-L is a GPS tracker with 4G LTE and 2G (GSM/GPRS). In TrackeraX it connects over the startek protocol on port 6222 and accepts 4 commands from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6222 (startek protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Istartek VT120-L model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Hardware and connectivity ]

  • 4G LTE

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Output controloutputControl
  • Custom commandcustom

[ Data reported by the startek protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Chargingcharge
  • Coolant temperaturecoolantTemp
  • Doordoor
  • Driver ID (RFID / iButton)driverUniqueId
  • Engine loadengineLoad
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Fuel usedfuelUsed
  • HDOPhdop
  • Engine hourshours
  • Ignitionignition
  • Digital inputsinput
  • Odometerodometer
  • Digital outputsoutput
  • External powerpower
  • RPMrpm
  • Satellitessat
  • Throttlethrottle

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • Outputs (out1, out2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Doordoor
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Harsh corneringhardCornering
  • Low powerlowPower
  • Power cutpowerCut
  • Power restoredpowerRestored
  • SOSsos

[ Protocol-specific attributes ]

airFlow · airPressure · airTemp · catalystLevel · oilPressure · oilTemp · torque

[ Other Istartek models ]

Istartek VT120-L FAQ

Which port does the Istartek VT120-L use to connect to TrackeraX?

The Istartek VT120-L uses the startek protocol and connects to port 6222 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Istartek VT120-L send to the platform?

TrackeraX reads 23 parameters of the startek protocol on this device, for example: Battery voltage, Charging, Coolant temperature, Door, Driver ID (RFID / iButton). Each one can become a sensor or an alert.

Can I send commands to the Istartek VT120-L from TrackeraX?

Yes. From the map or the device page you can send 3 command types to the Istartek VT120-L, including: Engine stop, Engine resume, Output control.

Which alarms does the Istartek VT120-L report?

TrackeraX recognizes these startek alarms: Door, Harsh acceleration, Harsh braking, Harsh cornering, Low power. Any of them can become an email, push or webhook notification.

How do I add the Istartek VT120-L to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6222 and create it in TrackeraX with its IMEI, choosing the Istartek VT120-L model.

Try the VT120-L on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.