Istartek VT130-L on TrackeraX
The Istartek VT130-L is a GPS tracker that works with TrackeraX over the startek protocol on port 6222. From the platform it supports engine stop, engine resume and output control, plus custom commands. The server decodes 8 alarm types from this protocol, such as door, harsh acceleration and harsh braking.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6222 (startek protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Istartek VT130-L model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Output controloutputControl
- Custom commandcustom
[ Data reported by the startek protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Chargingcharge
- Coolant temperaturecoolantTemp
- Doordoor
- Driver ID (RFID / iButton)driverUniqueId
- Engine loadengineLoad
- Fuelfuel
- Fuel consumptionfuelConsumption
- Fuel usedfuelUsed
- HDOPhdop
- Engine hourshours
- Ignitionignition
- Digital inputsinput
- Odometerodometer
- Digital outputsoutput
- External powerpower
- RPMrpm
- Satellitessat
- Throttlethrottle
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Doordoor
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- Low powerlowPower
- Power cutpowerCut
- Power restoredpowerRestored
- SOSsos
[ Protocol-specific attributes ]
airFlow · airPressure · airTemp · catalystLevel · oilPressure · oilTemp · torque
[ Other Istartek models ]
Istartek VT130-L FAQ
Which port does the Istartek VT130-L use to connect to TrackeraX?
The Istartek VT130-L uses the startek protocol and connects to port 6222 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Istartek VT130-L send to the platform?
TrackeraX reads 23 parameters of the startek protocol on this device, for example: Battery voltage, Charging, Coolant temperature, Door, Driver ID (RFID / iButton). Each one can become a sensor or an alert.
Can I send commands to the Istartek VT130-L from TrackeraX?
Yes. From the map or the device page you can send 3 command types to the Istartek VT130-L, including: Engine stop, Engine resume, Output control.
Which alarms does the Istartek VT130-L report?
TrackeraX recognizes these startek alarms: Door, Harsh acceleration, Harsh braking, Harsh cornering, Low power. Any of them can become an email, push or webhook notification.
How do I add the Istartek VT130-L to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6222 and create it in TrackeraX with its IMEI, choosing the Istartek VT130-L model.
Try the VT130-L on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

