[ GPS device ]

iTriangle TS101 Plus 4G on TrackeraX

The iTriangle TS101 Plus 4G is a vehicle tracker with Bluetooth, 4G LTE and GPS/GLONASS. It includes an internal battery, an RS-232 port and an RS-485 port. It is rated IP65 against dust and water. In TrackeraX it connects over the aquila protocol on port 6089 and accepts 1 command from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6089 (aquila protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the iTriangle TS101 Plus 4G model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Hardware and connectivity ]

  • Internal battery
  • Bluetooth
  • GLONASS
  • 4G LTE
  • RS-232
  • RS-485
  • IP65

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the aquila protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Chargingcharge
  • Fault codes (DTC)dtcs
  • Fuelfuel
  • HDOPhdop
  • Ignitionignition
  • Odometerodometer
  • External powerpower
  • GSM signalrssi
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)

[ Protocol-specific attributes ]

obd · sensorData · sensorId

[ Other iTriangle models ]

[ Other devices on the aquila protocol ]

iTriangle TS101 Plus 4G FAQ

Which port does the iTriangle TS101 Plus 4G use to connect to TrackeraX?

The iTriangle TS101 Plus 4G uses the aquila protocol and connects to port 6089 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the iTriangle TS101 Plus 4G send to the platform?

TrackeraX reads 12 parameters of the aquila protocol on this device, for example: Battery voltage, Charging, Fault codes (DTC), Fuel, HDOP. Each one can become a sensor or an alert.

How do I add the iTriangle TS101 Plus 4G to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6089 and create it in TrackeraX with its IMEI, choosing the iTriangle TS101 Plus 4G model.

Try the TS101 Plus 4G on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.