JIDO T63 on TrackeraX
The JIDO T63 is a GPS tracker that works with TrackeraX over the jido protocol on port 6237. From the platform it accepts custom commands. The server decodes 2 alarm types from this protocol, such as low battery and tampering.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6237 (jido protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the JIDO T63 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the jido protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery levelbatteryLevel
- Blockedblocked
- Chargingcharge
- Odometerodometer
- Satellitessat
[ Alarms the protocol can report ]
- Low batterylowBattery
- Tamperingtampering
[ Protocol-specific attributes ]
mode
JIDO T63 FAQ
Which port does the JIDO T63 use to connect to TrackeraX?
The JIDO T63 uses the jido protocol and connects to port 6237 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the JIDO T63 send to the platform?
TrackeraX reads 5 parameters of the jido protocol on this device, for example: Battery level, Blocked, Charging, Odometer, Satellites. Each one can become a sensor or an alert.
Which alarms does the JIDO T63 report?
TrackeraX recognizes these jido alarms: Low battery, Tampering. Any of them can become an email, push or webhook notification.
How do I add the JIDO T63 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6237 and create it in TrackeraX with its IMEI, choosing the JIDO T63 model.
Try the T63 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

