[ GPS device ]

Kenji protocol devices on TrackeraX

The Kenji protocol devices is a GPS tracker that works with TrackeraX over the kenji protocol on port 6102. From the platform it accepts custom commands. The server decodes 4 alarm types from this protocol, such as low battery, movement and sos.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6102 (kenji protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Kenji protocol devices model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the kenji protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Digital inputsinput
  • Digital outputsoutput
  • Satellitessat

[ Alarms the protocol can report ]

  • Low batterylowBattery
  • Movementmovement
  • SOSsos
  • Vibrationvibration

[ Other Kenji models ]

Kenji protocol devices FAQ

Which port does the Kenji protocol devices use to connect to TrackeraX?

The Kenji protocol devices uses the kenji protocol and connects to port 6102 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Kenji protocol devices send to the platform?

TrackeraX reads 3 parameters of the kenji protocol on this device, for example: Digital inputs, Digital outputs, Satellites. Each one can become a sensor or an alert.

Which alarms does the Kenji protocol devices report?

TrackeraX recognizes these kenji alarms: Low battery, Movement, SOS, Vibration. Any of them can become an email, push or webhook notification.

How do I add the Kenji protocol devices to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6102 and create it in TrackeraX with its IMEI, choosing the Kenji protocol devices model.

Try the Kenji protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.