KHD STG T100 on TrackeraX
The KHD STG T100 is a GPS tracker that works with TrackeraX over the khd protocol on port 6058. From the platform it supports engine stop, engine resume and request position, plus custom commands. The server decodes 17 alarm types from this protocol, such as accident, door and fatigue driving.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6058 (khd protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the KHD STG T100 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Request positionpositionSingle
- Firmware versiongetVersion
- Factory resetfactoryReset
- Speed limitsetSpeedLimit
- Set odometersetOdometer
- Custom commandcustom
[ Data reported by the khd protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armedarmed
- Battery levelbatteryLevel
- Driver ID (RFID / iButton)driverUniqueId
- Fuelfuel
- G-sensorgSensor
- Ignitionignition
- Odometerodometer
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- Doordoor
- Fatigue drivingfatigueDriving
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- Idlingidle
- Low powerlowPower
- Overspeedoverspeed
- Power cutpowerCut
- SOSsos
- Tamperingtampering
- Temperaturetemperature
- Towingtow
- Vibrationvibration
[ Protocol-specific attributes ]
alarmMode · debug · model · sign · valetMode
[ Other KHD models ]
[ Other devices on the khd protocol ]
KHD STG T100 FAQ
Which port does the KHD STG T100 use to connect to TrackeraX?
The KHD STG T100 uses the khd protocol and connects to port 6058 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the KHD STG T100 send to the platform?
TrackeraX reads 9 parameters of the khd protocol on this device, for example: Armed, Battery level, Driver ID (RFID / iButton), Fuel, G-sensor. Each one can become a sensor or an alert.
Can I send commands to the KHD STG T100 from TrackeraX?
Yes. From the map or the device page you can send 7 command types to the KHD STG T100, including: Engine stop, Engine resume, Request position, Firmware version, Factory reset.
Which alarms does the KHD STG T100 report?
TrackeraX recognizes these khd alarms: Accident, Door, Fatigue driving, Geofence entry, Geofence exit. Any of them can become an email, push or webhook notification.
How do I add the KHD STG T100 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6058 and create it in TrackeraX with its IMEI, choosing the KHD STG T100 model.
Try the STG T100 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

