[ GPS device ]

Laipac StarFinder Bus on TrackeraX

The Laipac StarFinder Bus is a GPS tracker that works with TrackeraX over the laipac protocol on port 6048. From the platform it supports reboot device and request position, plus custom commands. The server decodes 10 alarm types from this protocol, such as geofence entry, geofence exit and low battery.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6048 (laipac protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Laipac StarFinder Bus model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Reboot devicerebootDevice
  • Request positionpositionSingle
  • Custom commandcustom

[ Data reported by the laipac protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • GPS statusgps
  • SIM ICCIDiccid
  • Odometerodometer
  • Phone numberphone
  • Firmware versionversionFw

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)

[ Alarms the protocol can report ]

  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Low batterylowBattery
  • Overspeedoverspeed
  • Power cutpowerCut
  • Power offpowerOff
  • SOSsos
  • Tamperingtampering
  • Towingtow
  • Vibrationvibration

[ Other Laipac models ]

Laipac StarFinder Bus FAQ

Which port does the Laipac StarFinder Bus use to connect to TrackeraX?

The Laipac StarFinder Bus uses the laipac protocol and connects to port 6048 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Laipac StarFinder Bus send to the platform?

TrackeraX reads 8 parameters of the laipac protocol on this device, for example: Battery voltage, GPS status, SIM ICCID, Odometer, Phone number. Each one can become a sensor or an alert.

Can I send commands to the Laipac StarFinder Bus from TrackeraX?

Yes. From the map or the device page you can send 2 command types to the Laipac StarFinder Bus, including: Reboot device, Request position.

Which alarms does the Laipac StarFinder Bus report?

TrackeraX recognizes these laipac alarms: Geofence entry, Geofence exit, Low battery, Overspeed, Power cut. Any of them can become an email, push or webhook notification.

How do I add the Laipac StarFinder Bus to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6048 and create it in TrackeraX with its IMEI, choosing the Laipac StarFinder Bus model.

Try the StarFinder Bus on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.