Maxitrac protocol devices on TrackeraX
The Maxitrac protocol devices is a GPS tracker that works with TrackeraX over the maxitrac protocol on port 6600. From the platform it accepts custom commands. The server decodes 11 alarm types from this protocol, such as fatigue driving, fault and geofence entry.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6600 (maxitrac protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Maxitrac protocol devices model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the maxitrac protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery levelbatteryLevel
- Blockedblocked
- Chargingcharge
- Doordoor
- Driver ID (RFID / iButton)driverUniqueId
- Fuelfuel
- GPS statusgps
- Humidityhumidity
- Ignitionignition
- Odometerodometer
- External powerpower
- GSM signalrssi
- Satellitessat
Numbered inputs and sensors
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Fatigue drivingfatigueDriving
- Faultfault
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- GPS antenna cutgpsAntennaCut
- Low batterylowBattery
- Overspeedoverspeed
- Power cutpowerCut
- SOSsos
- Towingtow
- Vibrationvibration
[ Protocol-specific attributes ]
alertType · backCap · eventSource · fuel1 · fuel2 · fuel3 · lbs · sensorBattery · sensorBatteryLevel · sensorRssi · steelCable
Maxitrac protocol devices FAQ
Which port does the Maxitrac protocol devices use to connect to TrackeraX?
The Maxitrac protocol devices uses the maxitrac protocol and connects to port 6600 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Maxitrac protocol devices send to the platform?
TrackeraX reads 14 parameters of the maxitrac protocol on this device, for example: Battery level, Blocked, Charging, Door, Driver ID (RFID / iButton). Each one can become a sensor or an alert.
Which alarms does the Maxitrac protocol devices report?
TrackeraX recognizes these maxitrac alarms: Fatigue driving, Fault, Geofence entry, Geofence exit, GPS antenna cut. Any of them can become an email, push or webhook notification.
How do I add the Maxitrac protocol devices to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6600 and create it in TrackeraX with its IMEI, choosing the Maxitrac protocol devices model.
Try the Maxitrac protocol devices on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

