[ GPS device ]

Maxtrack MXT-141 on TrackeraX

The Maxtrack MXT-141 is a vehicle tracker. It comes with an internal battery. It is rated IP67 against dust and water. In TrackeraX it connects over the mxt protocol on port 6087 and accepts 1 command from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6087 (mxt protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Maxtrack MXT-141 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Hardware and connectivity ]

  • Internal battery
  • IP67

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the mxt protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Chargingcharge
  • Driver ID (RFID / iButton)driverUniqueId
  • HDOPhdop
  • Engine hourshours
  • Ignitionignition
  • Digital inputsinput
  • Odometerodometer
  • Digital outputsoutput
  • External powerpower
  • GSM signalrssi
  • Satellitessat

Numbered inputs and sensors

  • Temperature sensors (temp1, temp2…)

[ Other Maxtrack models ]

Maxtrack MXT-141 FAQ

Which port does the Maxtrack MXT-141 use to connect to TrackeraX?

The Maxtrack MXT-141 uses the mxt protocol and connects to port 6087 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Maxtrack MXT-141 send to the platform?

TrackeraX reads 13 parameters of the mxt protocol on this device, for example: Battery voltage, Charging, Driver ID (RFID / iButton), HDOP, Engine hours. Each one can become a sensor or an alert.

How do I add the Maxtrack MXT-141 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6087 and create it in TrackeraX with its IMEI, choosing the Maxtrack MXT-141 model.

Try the MXT-141 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.