Megastek MT400 on TrackeraX
The Megastek MT400 is a GPS tracker that works with TrackeraX over the megastek protocol on port 6024. From the platform it accepts custom commands. The server decodes 18 alarm types from this protocol, such as fatigue driving, fault and geofence entry.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6024 (megastek protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Megastek MT400 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the megastek protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery levelbatteryLevel
- Chargingcharge
- Driver ID (RFID / iButton)driverUniqueId
- HDOPhdop
- Heart rateheartRate
- Digital inputsinput
- Odometerodometer
- Digital outputsoutput
- Satellitessat
- Visible satellitessatVisible
- Stepssteps
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Fatigue drivingfatigueDriving
- Faultfault
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- GPS antenna cutgpsAntennaCut
- Harsh corneringhardCornering
- Locklock
- Low batterylowBattery
- Low powerlowPower
- Low speedlowspeed
- Overspeedoverspeed
- Power cutpowerCut
- Power offpowerOff
- Power onpowerOn
- Power restoredpowerRestored
- SOSsos
- Unlockunlock
- Vibrationvibration
[ Protocol-specific attributes ]
activityTime · belt · deepSleepTime · lightSleepTime
[ Other Megastek models ]
Megastek MT400 FAQ
Which port does the Megastek MT400 use to connect to TrackeraX?
The Megastek MT400 uses the megastek protocol and connects to port 6024 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Megastek MT400 send to the platform?
TrackeraX reads 13 parameters of the megastek protocol on this device, for example: Battery level, Charging, Driver ID (RFID / iButton), HDOP, Heart rate. Each one can become a sensor or an alert.
Which alarms does the Megastek MT400 report?
TrackeraX recognizes these megastek alarms: Fatigue driving, Fault, Geofence entry, Geofence exit, GPS antenna cut. Any of them can become an email, push or webhook notification.
How do I add the Megastek MT400 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6024 and create it in TrackeraX with its IMEI, choosing the Megastek MT400 model.
Try the MT400 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

