Meitrack MD101 on TrackeraX
The Meitrack MD101 is a video telematics device that works with TrackeraX over the meitrack protocol on port 6020. From the platform it supports engine stop, engine resume and arm alarm, plus custom commands. The server decodes 15 alarm types from this protocol, such as accident, fatigue driving and geofence entry.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6020 (meitrack protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Meitrack MD101 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Video and cameras ]
This model streams or records video. TrackeraX shows live video and playback from the web and the apps, using the meitrack video protocol.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Arm alarmalarmArm
- Disarm alarmalarmDisarm
- Request positionpositionSingle
- Position logpositionLog
- Request photorequestPhoto
- Send SMSsendSms
- Custom commandcustom
[ Data reported by the meitrack protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Battery levelbatteryLevel
- Coolant temperaturecoolantTemp
- Driver ID (RFID / iButton)driverUniqueId
- Fuelfuel
- Fuel consumptionfuelConsumption
- Fuel usedfuelUsed
- HDOPhdop
- Engine hourshours
- Photoimage
- Digital inputsinput
- Locklock
- OBD odometerobdOdometer
- OBD speedobdSpeed
- Odometerodometer
- Digital outputsoutput
- External powerpower
- RPMrpm
- GSM signalrssi
- Satellitessat
- Throttlethrottle
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- Fatigue drivingfatigueDriving
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- Jammingjamming
- Low batterylowBattery
- Low powerlowPower
- Overspeedoverspeed
- Power cutpowerCut
- Power restoredpowerRestored
- SOSsos
- Towingtow
[ Protocol-specific attributes ]
alarmType · eventData · runtime · tagBattery · tagHumidity · tagName · tagTemp · taximeterDistance · taximeterEnd · taximeterFare · taximeterOn · taximeterStart · taximeterTrip · taximeterWait · tempData
[ Other Meitrack models ]
Meitrack MD101 FAQ
Which port does the Meitrack MD101 use to connect to TrackeraX?
The Meitrack MD101 uses the meitrack protocol and connects to port 6020 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Meitrack MD101 send to the platform?
TrackeraX reads 25 parameters of the meitrack protocol on this device, for example: Battery voltage, Battery level, Coolant temperature, Driver ID (RFID / iButton), Fuel. Each one can become a sensor or an alert.
Can I send commands to the Meitrack MD101 from TrackeraX?
Yes. From the map or the device page you can send 8 command types to the Meitrack MD101, including: Engine stop, Engine resume, Arm alarm, Disarm alarm, Request position.
Which alarms does the Meitrack MD101 report?
TrackeraX recognizes these meitrack alarms: Accident, Fatigue driving, Geofence entry, Geofence exit, Harsh acceleration. Any of them can become an email, push or webhook notification.
Does the Meitrack MD101 stream video?
Yes. The Meitrack MD101 is a video device and TrackeraX integrates it with the meitrack protocol: live video and recordings next to the map.
How do I add the Meitrack MD101 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6020 and create it in TrackeraX with its IMEI, choosing the Meitrack MD101 model.
Try the Meitrack MD101 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

