[ GPS device ]

Mictrack MT909 on TrackeraX

The Mictrack MT909 is a GPS tracker that works with TrackeraX over the mictrack protocol on port 6191. From the platform it accepts custom commands. The server decodes 6 alarm types from this protocol, such as geofence entry, geofence exit and low battery.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6191 (mictrack protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Mictrack MT909 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the mictrack protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Satellitessat

[ Alarms the protocol can report ]

  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Low batterylowBattery
  • Power offpowerOff
  • Power onpowerOn
  • SOSsos

[ Other Mictrack models ]

Mictrack MT909 FAQ

Which port does the Mictrack MT909 use to connect to TrackeraX?

The Mictrack MT909 uses the mictrack protocol and connects to port 6191 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Mictrack MT909 send to the platform?

TrackeraX reads 2 parameters of the mictrack protocol on this device, for example: Battery voltage, Satellites. Each one can become a sensor or an alert.

Which alarms does the Mictrack MT909 report?

TrackeraX recognizes these mictrack alarms: Geofence entry, Geofence exit, Low battery, Power off, Power on. Any of them can become an email, push or webhook notification.

How do I add the Mictrack MT909 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6191 and create it in TrackeraX with its IMEI, choosing the Mictrack MT909 model.

Try the MT909 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.