[ GPS device ]

MilesMate protocol devices on TrackeraX

The MilesMate protocol devices is a GPS tracker that works with TrackeraX over the milesmate protocol on port 6176. From the platform it accepts custom commands. The server decodes 3 alarm types from this protocol, such as overspeed, sos and towing.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6176 (milesmate protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the MilesMate protocol devices model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the milesmate protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Blockedblocked
  • Chargingcharge
  • Ignitionignition

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)

[ Alarms the protocol can report ]

  • Overspeedoverspeed
  • SOSsos
  • Towingtow

MilesMate protocol devices FAQ

Which port does the MilesMate protocol devices use to connect to TrackeraX?

The MilesMate protocol devices uses the milesmate protocol and connects to port 6176 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the MilesMate protocol devices send to the platform?

TrackeraX reads 5 parameters of the milesmate protocol on this device, for example: Battery voltage, Blocked, Charging, Ignition. Each one can become a sensor or an alert.

Which alarms does the MilesMate protocol devices report?

TrackeraX recognizes these milesmate alarms: Overspeed, SOS, Towing. Any of them can become an email, push or webhook notification.

How do I add the MilesMate protocol devices to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6176 and create it in TrackeraX with its IMEI, choosing the MilesMate protocol devices model.

Try the MilesMate protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.