[ GPS device ]

MiniFinder TE200 on TrackeraX

The MiniFinder TE200 is a GPS tracker that works with TrackeraX over the minifinder protocol on port 6062. From the platform it supports set time zone, voice monitoring and overspeed alarm, plus custom commands. The server decodes 7 alarm types from this protocol, such as fall, fault and geofence.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6062 (minifinder protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the MiniFinder TE200 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Set time zonesetTimezone
  • Voice monitoringvoiceMonitoring
  • Overspeed alarmalarmSpeed
  • Movement alarmmovementAlarm
  • Vibration alarmalarmVibration
  • Fall alarmalarmFall
  • AGPSsetAgps
  • IndicatorsetIndicator
  • Power saving modemodePowerSaving
  • Deep sleep modemodeDeepSleep
  • SOS numbersosNumber
  • Custom commandcustom

[ Data reported by the minifinder protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery levelbatteryLevel
  • Chargingcharge
  • HDOPhdop
  • GSM signalrssi
  • Satellitessat
  • Visible satellitessatVisible

[ Alarms the protocol can report ]

  • FallfallDown
  • Faultfault
  • Geofencegeofence
  • Low batterylowBattery
  • Movementmovement
  • Overspeedoverspeed
  • SOSsos

[ Other MiniFinder models ]

[ Other devices on the minifinder protocol ]

MiniFinder TE200 FAQ

Which port does the MiniFinder TE200 use to connect to TrackeraX?

The MiniFinder TE200 uses the minifinder protocol and connects to port 6062 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the MiniFinder TE200 send to the platform?

TrackeraX reads 6 parameters of the minifinder protocol on this device, for example: Battery level, Charging, HDOP, GSM signal, Satellites. Each one can become a sensor or an alert.

Can I send commands to the MiniFinder TE200 from TrackeraX?

Yes. From the map or the device page you can send 11 command types to the MiniFinder TE200, including: Set time zone, Voice monitoring, Overspeed alarm, Movement alarm, Vibration alarm.

Which alarms does the MiniFinder TE200 report?

TrackeraX recognizes these minifinder alarms: Fall, Fault, Geofence, Low battery, Movement. Any of them can become an email, push or webhook notification.

How do I add the MiniFinder TE200 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6062 and create it in TrackeraX with its IMEI, choosing the MiniFinder TE200 model.

Try the TE200 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.