MiniFinder Veo on TrackeraX
The MiniFinder Veo is a GPS tracker that works with TrackeraX over the minifinder2 protocol on port 6187. From the platform it supports configuration and firmware update, plus custom commands. The server decodes 9 alarm types from this protocol, such as fall, geofence entry and geofence exit.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6187 (minifinder2 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the MiniFinder Veo model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Configurationconfiguration
- Firmware updatefirmwareUpdate
- Custom commandcustom
[ Data reported by the minifinder2 protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Battery levelbatteryLevel
- Chargingcharge
- Geofencegeofence
- HDOPhdop
- Heart rateheartRate
- SIM ICCIDiccid
- Motionmotion
- Odometerodometer
- Mobile operatoroperator
- Phone numberphone
- GSM signalrssi
- Satellitessat
- Stepssteps
- Firmware versionversionFw
[ Alarms the protocol can report ]
- FallfallDown
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- Low batterylowBattery
- Movementmovement
- Overspeedoverspeed
- Power offpowerOff
- Power onpowerOn
- SOSsos
[ Protocol-specific attributes ]
activity · agpsLatitude · agpsLongitude · agpsUpdate · apn · apnPassword · apnUser · bark · barkCount · barkInterval · barkLevel · barkStop · bleLatitude · bleLocation · bleLongitude · bleMac · button1 · button2 · callDuration · callResult · callStatus · description · deviceId · deviceName · enableControl · extraEnableControl · firmware · geoAlert · gpsUrl · gsmBand · gsmModule · heartbeatInterval · homePlmn · imei · imsi · interval · lbsUrl · moduleNumber · motionAlert · msisdn and 26 more
[ Other MiniFinder models ]
[ Other devices on the minifinder2 protocol ]
MiniFinder Veo FAQ
Which port does the MiniFinder Veo use to connect to TrackeraX?
The MiniFinder Veo uses the minifinder2 protocol and connects to port 6187 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the MiniFinder Veo send to the platform?
TrackeraX reads 15 parameters of the minifinder2 protocol on this device, for example: Battery voltage, Battery level, Charging, Geofence, HDOP. Each one can become a sensor or an alert.
Can I send commands to the MiniFinder Veo from TrackeraX?
Yes. From the map or the device page you can send 2 command types to the MiniFinder Veo, including: Configuration, Firmware update.
Which alarms does the MiniFinder Veo report?
TrackeraX recognizes these minifinder2 alarms: Fall, Geofence entry, Geofence exit, Low battery, Movement. Any of them can become an email, push or webhook notification.
How do I add the MiniFinder Veo to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6187 and create it in TrackeraX with its IMEI, choosing the MiniFinder Veo model.
Try the Veo on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

