[ GPS device ]

Noran NR024 on TrackeraX

The Noran NR024 is a vehicle tracker. It includes an RS-232 port. In TrackeraX it connects over the noran protocol on port 6053 and accepts 6 commands from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6053 (noran protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Noran NR024 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Hardware and connectivity ]

  • RS-232

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Request positionpositionSingle
  • Reporting intervalpositionPeriodic
  • Stop reportingpositionStop
  • Custom commandcustom

[ Data reported by the noran protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Fuelfuel
  • Odometerodometer

Numbered inputs and sensors

  • IO elements (io1, io2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Geofence exitgeofenceExit
  • Overspeedoverspeed
  • Power offpowerOff
  • SOSsos

[ Other Noran models ]

Noran NR024 FAQ

Which port does the Noran NR024 use to connect to TrackeraX?

The Noran NR024 uses the noran protocol and connects to port 6053 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Noran NR024 send to the platform?

TrackeraX reads 4 parameters of the noran protocol on this device, for example: Fuel, Odometer. Each one can become a sensor or an alert.

Can I send commands to the Noran NR024 from TrackeraX?

Yes. From the map or the device page you can send 5 command types to the Noran NR024, including: Engine stop, Engine resume, Request position, Reporting interval, Stop reporting.

Which alarms does the Noran NR024 report?

TrackeraX recognizes these noran alarms: Geofence exit, Overspeed, Power off, SOS. Any of them can become an email, push or webhook notification.

How do I add the Noran NR024 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6053 and create it in TrackeraX with its IMEI, choosing the Noran NR024 model.

Try the NR024 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.