NTO Tracker on TrackeraX
The NTO Tracker is a GPS tracker that works with TrackeraX over the nto protocol on port 6250. From the platform it accepts custom commands. The server decodes 8 alarm types from this protocol, such as door, geofence entry and geofence exit.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6250 (nto protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the NTO Tracker model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Alarms the protocol can report ]
- Doordoor
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- Jammingjamming
- Low batterylowBattery
- Overspeedoverspeed
- Power cutpowerCut
- Vibrationvibration
NTO Tracker FAQ
Which port does the NTO Tracker use to connect to TrackeraX?
The NTO Tracker uses the nto protocol and connects to port 6250 on your TrackeraX server. Just set your platform domain and that port on the device.
Which alarms does the NTO Tracker report?
TrackeraX recognizes these nto alarms: Door, Geofence entry, Geofence exit, Jamming, Low battery. Any of them can become an email, push or webhook notification.
How do I add the NTO Tracker to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6250 and create it in TrackeraX with its IMEI, choosing the NTO Tracker model.
Try the NTO Tracker on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

