NVS СН-5707 on TrackeraX
The NVS СН-5707 is a GPS tracker that works with TrackeraX over the nvs protocol on port 6101. From the platform it accepts custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6101 (nvs protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the NVS СН-5707 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the nvs protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Satellitessat
Numbered inputs and sensors
- IO elements (io1, io2…)
[ Protocol-specific attributes ]
reason
[ Other NVS models ]
NVS СН-5707 FAQ
Which port does the NVS СН-5707 use to connect to TrackeraX?
The NVS СН-5707 uses the nvs protocol and connects to port 6101 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the NVS СН-5707 send to the platform?
TrackeraX reads 2 parameters of the nvs protocol on this device, for example: Satellites. Each one can become a sensor or an alert.
How do I add the NVS СН-5707 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6101 and create it in TrackeraX with its IMEI, choosing the NVS СН-5707 model.
Try the СН-5707 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

