[ GPS device ]

Omni JQ IoT on TrackeraX

The Omni JQ IoT is a GPS tracker that works with TrackeraX over the omnijq protocol on port 6400. From the platform it supports request position, reporting interval and engine stop, plus custom commands. The server decodes 5 alarm types from this protocol, such as fall, fault and low battery.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6400 (omnijq protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Omni JQ IoT model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Request positionpositionSingle
  • Reporting intervalpositionPeriodic
  • Engine stopengineStop
  • Engine resumeengineResume
  • Arm alarmalarmArm
  • Disarm alarmalarmDisarm
  • Firmware updatefirmwareUpdate
  • Set time zonesetTimezone
  • Device statusgetDeviceStatus
  • Custom commandcustom

[ Data reported by the omnijq protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Battery levelbatteryLevel
  • Blockedblocked
  • Chargingcharge
  • HDOPhdop
  • SIM ICCIDiccid
  • Odometerodometer
  • External powerpower
  • GSM signalrssi
  • Satellitessat
  • Trip odometertripOdometer
  • Firmware versionversionFw

[ Alarms the protocol can report ]

  • FallfallDown
  • Faultfault
  • Low batterylowBattery
  • Movementmovement
  • Tamperingtampering

[ Protocol-specific attributes ]

alarmCleared · alarmCode · battery2Voltage · batteryCurrent · batteryCycles · batteryFaults · batteryHealth · batteryTemp · bleKey · bmsVersion · btMac · cellVoltageMax · cellVoltageMin · chargingStation · chargingVersion · configType · customData · dashboardError · errorCode · eventDetail · externalDevice · externalResult · lockResult · otaChunkIndex · otaCurrentVersion · otaHttpStep · otaResult · otaSize · otaStep · otaTargetVersion · otaTotalChunks · remainingMileage · speedMode · tcpProtoVersion · timezoneOffsetMin · voiceVersion

[ Other Omni models ]

Omni JQ IoT FAQ

Which port does the Omni JQ IoT use to connect to TrackeraX?

The Omni JQ IoT uses the omnijq protocol and connects to port 6400 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Omni JQ IoT send to the platform?

TrackeraX reads 12 parameters of the omnijq protocol on this device, for example: Battery voltage, Battery level, Blocked, Charging, HDOP. Each one can become a sensor or an alert.

Can I send commands to the Omni JQ IoT from TrackeraX?

Yes. From the map or the device page you can send 9 command types to the Omni JQ IoT, including: Request position, Reporting interval, Engine stop, Engine resume, Arm alarm.

Which alarms does the Omni JQ IoT report?

TrackeraX recognizes these omnijq alarms: Fall, Fault, Low battery, Movement, Tampering. Any of them can become an email, push or webhook notification.

How do I add the Omni JQ IoT to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6400 and create it in TrackeraX with its IMEI, choosing the Omni JQ IoT model.

Try the Omni JQ IoT on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.