OpenGTS / GPSLogger on TrackeraX
The OpenGTS / GPSLogger is a GPS tracker that works with TrackeraX over the opengts protocol on port 6159. From the platform it accepts custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6159 (opengts protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the OpenGTS / GPSLogger model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the opengts protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery levelbatteryLevel
[ Other OpenGTS models ]
OpenGTS / GPSLogger FAQ
Which port does the OpenGTS / GPSLogger use to connect to TrackeraX?
The OpenGTS / GPSLogger uses the opengts protocol and connects to port 6159 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the OpenGTS / GPSLogger send to the platform?
TrackeraX reads 1 parameters of the opengts protocol on this device, for example: Battery level. Each one can become a sensor or an alert.
How do I add the OpenGTS / GPSLogger to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6159 and create it in TrackeraX with its IMEI, choosing the OpenGTS / GPSLogger model.
Try the OpenGTS / GPSLogger on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

