[ GPS device ]

Portman GT2000 on TrackeraX

The Portman GT2000 is a GPS tracker that works with TrackeraX over the portman protocol on port 6211. From the platform it supports engine stop and engine resume, plus custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6211 (portman protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Portman GT2000 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Custom commandcustom

[ Data reported by the portman protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Driver ID (RFID / iButton)driverUniqueId
  • Fuelfuel
  • Ignitionignition
  • Odometerodometer
  • GSM signalrssi
  • Satellitessat

Numbered inputs and sensors

  • Temperature sensors (temp1, temp2…)

[ Other Portman models ]

Portman GT2000 FAQ

Which port does the Portman GT2000 use to connect to TrackeraX?

The Portman GT2000 uses the portman protocol and connects to port 6211 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Portman GT2000 send to the platform?

TrackeraX reads 7 parameters of the portman protocol on this device, for example: Driver ID (RFID / iButton), Fuel, Ignition, Odometer, GSM signal. Each one can become a sensor or an alert.

Can I send commands to the Portman GT2000 from TrackeraX?

Yes. From the map or the device page you can send 2 command types to the Portman GT2000, including: Engine stop, Engine resume.

How do I add the Portman GT2000 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6211 and create it in TrackeraX with its IMEI, choosing the Portman GT2000 model.

Try the GT2000 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.