[ GPS device ]

Radshid X0 on TrackeraX

The Radshid X0 is a GPS tracker that works with TrackeraX over the radshid protocol on port 6265. From the platform it accepts custom commands. The server decodes 8 alarm types from this protocol, such as fatigue driving, gps antenna cut and jamming.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6265 (radshid protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Radshid X0 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the radshid protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery levelbatteryLevel
  • Chargingcharge
  • Driver ID (RFID / iButton)driverUniqueId
  • Engine hourshours
  • Humidityhumidity
  • Ignitionignition
  • Digital inputsinput
  • OBD speedobdSpeed
  • Odometerodometer
  • PDOPpdop
  • External powerpower
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Firmware versionversionFw

Numbered inputs and sensors

  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Fatigue drivingfatigueDriving
  • GPS antenna cutgpsAntennaCut
  • Jammingjamming
  • Low batterylowBattery
  • Overspeedoverspeed
  • Power cutpowerCut
  • Power restoredpowerRestored
  • Vibrationvibration

[ Other Radshid models ]

Radshid X0 FAQ

Which port does the Radshid X0 use to connect to TrackeraX?

The Radshid X0 uses the radshid protocol and connects to port 6265 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Radshid X0 send to the platform?

TrackeraX reads 16 parameters of the radshid protocol on this device, for example: Battery level, Charging, Driver ID (RFID / iButton), Engine hours, Humidity. Each one can become a sensor or an alert.

Which alarms does the Radshid X0 report?

TrackeraX recognizes these radshid alarms: Fatigue driving, GPS antenna cut, Jamming, Low battery, Overspeed. Any of them can become an email, push or webhook notification.

How do I add the Radshid X0 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6265 and create it in TrackeraX with its IMEI, choosing the Radshid X0 model.

Try the Radshid X0 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.